Here is the final 35mm lens adapter. After hour of searching the web for an encasing I found this 5.9"x5.9"x2.25" plastic box. The box is slightly larger than what I had in mind but it was the best I could find for under $10. As soon as I recieved the box I began working. First I drilled the holes for the lens mount, second for the motor plate inside the box and last a small hole in the back for the battery cable. Next I attached the adapter parts to the front and back plates.
After all of the hardware was assembled and tested it was time to paint it black. I took everything apart, used masking tape to cover anything I didn't want painted, laid the front and back plates out and use a matte spray paint to cover the box.
This is by far the best adapter box I've yet to build. As soon as I find the right parts I plan on adding a remote controlled focus puller as an addition to the box. But that's for another time and another blog.
Comments
Post a Comment