Ford Fiesta 2012 Spot.

Last week I wrapped production on a new spot for the Ford Fiesta 2012. This was a special project for me because I actually wrote the script and directed the commercial. I had a great time directing the actors and driving the new Fiesta on set. It was a challenge to light the car and it took the crew an entire day to pre-light but in the end everything looked amazing. The spot has yet to air but as soon as it does I will post it. For now here are some screen shots.

Comments

Thursday Life Drawing with the Ringmaster!

Last night we had a very special drawing session. The Ringmaster was in the house! Jennifer surprised us with a magnificent costume, we had a new artist join the group and the best part of the night (I dare say) was Jenny's home made peach cobbler a la mode. Delicious! Before everyone showed up Jenny and I debated over what music to listen to. We both believe that music has powerful influences and that it's important to pick the right tunes before drawing. Having said that, agreeing on music is not always the easiest thing to do. For example, my pick for Thursdays circus theme was Mr. Bungle . Jenny disagreed with my musical choice, calling it geeky white guy music and instead suggested we listen to Louis Armstrong. These are obviously two very different artist but in the end I had to agree with Jenny's pick. Something as hardcore as Mr. Bungle would have been to distracting to listen to. We made a compromise and settled on Louis Armstrong for drawing and Mr. Bu...

Monday Night Drawing at Buckwild Gallery in Venice!

At the end of December last year we attended an art show at the Buckwild gallery in Venice. That night we met the gallery owner and talked with him about the possibility of hosting weekly figure drawing sessions in the space. We quickly came up with a plan and were soon on our way to getting things ready for our first meet up. Jennifer began advertising while my dad and I built ten new drawing benches for the class. The second Monday of January was our first session at the new location and to our surprise the night was a big success. Jennifer brought her amazingly good chocolate chip cookies and every seat was filled . Next Monday will be a special drawing night in honor of Valentines day. We have a lovely couple modeling for us, so if your local and want to brush up on your drawing skills come on down. For more information about our Monday night figure drawing sessions check us out at www.meetup.com .

DIY PCB - Etching your own (Printed Circuit Boards) at home.

Here's a quick tutorial on etching a custom PCB at home. All of the materials can be found at your local electronics store or online. Here is what you'll need to get started. MATERIALS: sodium persulfate(toxic stuff) 1 sheet of copper clad board(also pretty toxic) acetone, rubbing alcohol and cotton balls glossy photo paper 1 sharpie marker TOOLS: 3 plastic containers(got mine from ordering won ton soup) 1 rough side of a dish sponge or 1 sanding block laser printer(or access to) ironing machine Dremel or small hand saw PCB Software ( EAGLE ) (CAUTION) The materials use in this tutorial are toxic, dangerous and even deadly if not handled properly. Make sure to wear protective gear and to work in a well ventelated space. It's a good idea to wear gloves and a paper mask while following these steps. GETTING STARTED We are going to start out with our circuit already exported from EAGLE, the so...

Dan Racusin

Search This Blog